Hydrophobic PTFE Membrane Filters

Category: Decontamination > Miscellaneous Equipment/Methods > Fixatives
Reference # : Model No : LiquiPro F3

LiquiPro™ F3 is recommended for a wide range of chemical filtration. LiquiPro™ F3 series filters have enhanced cleanliness and are made of Hydrophobic PTFE membrane for high chemical inertness. Suitable for strong acidic and base solutions.

Benefits

•Enhanced cleanliness from cleanroom manufacturing, cleaning technologies with on-line process QC monitoring and class 100 cleanroom packaging to achieve a cleanliness level previously only achievable with all-Teflon filters.
•Optimised high-porosity, uniform pore-size distribution, large filtration area, low pressure-drop, high flow0rate and long service life.
•LiquiPro™ F3 are made with thermal bonding of PTFE membrane with virgin grade polypropylene support and hardware without adhesives or binders.
•Certificate of quality enclosed with each product lot for quality assurance that ensures filter-to-filter, lot-to-lot performance.
•Fast rinse up time of UHP and E-Grade filters, which has been pre-flushed with UP DI water (18.2 Megaohm-cm, TOC <100ppb).

Limitations

•Pore size rating: 0.05, 0.1, 0.2, 0.45, 1, 3, 5, 10 and 20.0µm.
•Maximum differential pressure: 1.37 bard (19.91psid) @ 90°C (194°F) 5.49 bard (79.65 psid) @ 20°C (68°F).
•Materials of construction: Filter media: Polytetrafluoroethylene (PTFE) Hydrophobic membrane Support: Virgin grade polypropylene End caps, core, cage: PolypropyleneO-rings: EPDM, FKM, E-FKM

Comments

Pictures

LiquiPro F3

Videos