GEF-530

Category: Robotics > Dismantling and Retrieval > Industrial Robot
Reference # : Model No : 530

The GEF-530 drastically reduces the time required to remove the lining from an electric furnace and at the same time do the job with substantially less man-hours. For example, two men and a GEF-530 can make a normal teardown (bands and walls to the slag line) on a 150 ton furnace in 4 to 6 hours including the installation of the machine. GEF-530s can be placed on furnaces ranging from 50 to 350 tons.

Benefits

• Lowers the amount of time spent removing lining from electrical furnaces by a large amount.
• The boom can be rotated 360 degrees.
• Remote controlled by a hand held control pendant connected by a 50 ft. cable.
• Optional equipment available to improve the machine, e.g. pneumatic hammer, radio controls, etc.

Limitations

• Machine length: Up to 40’ (12.1m)
• Minimum diameter: 15’ (4.5m)
• Maximum diameter: 40’ (12.1m)
• Machine width: 7’-4” (2235mm)
• Machine height : As per requirements
• Reach from center of rotation with out tool bit: 20’-10-3/4” (6369mm)
• Boom angle: +15° -90°
• Tool angle: +30° -90°
• Swing continuous: 360°
• Boom stroke: 6’ (1829mm)
• Outrigger length: Adjustable to Furnace diameters
• Weight: 30,860 lbs. (13,999kg)

Comments

Pictures

	Product In Use
	Product Image

Videos