950R/T Pipe and Cable Locator System

Category: Characterization > Utilities Identification > Electromagnetic
Reference # : Model No : 950R/T

The 950R/T system includes three modes and more than 20 frequencies, which help to quickly locate buried telephone, CATV, power, gas and water lines with a tracer wire. In active mode, the 950T transmits via direct-line connection, induction clamp or induced broadcast signals. In passive mode, the 950R detects signals generated by 31 kHz (CATV) and 50/60 Hz power, as well as re-radiated radio frequencies. In beacon mode, the 950R detects signals from optional beacons to locate non-metallic service lines; with the 512 Beacon, the 950R locates blockages within cast-iron pipe.

Benefits

• Lightweight 950R receiver is balanced for easy handling. • Simultaneous 8 and 29 kHz transmission means an alternate signal is available if one is hard to detect; 80 kHz is helpful in locating old tracer wires or pipes with insulators where low frequencies do not work well. • Enhanced backlit LCD offers optimal visibility in low-light conditions. • Patented digital signal processing (DSP) offers more effective locating and reduces interference; stable DSP depth readings do not vary with temperature or time, as analog readings do • Works with 970T transmitter, which can transmit all 950T frequencies plus a 200-kHz frequency for more difficult locates. • Rugged case and sealed keypad withstand tough weather conditions and provide superior moisture resistance.

Limitations

NA

Comments

Pictures

Videos